Using nanotechnology to minimize fire damage

Nanotechnology, manufactured at scale and low cost while posing minimal health risks, may point to a future with fewer fires that are less lethal and less damaging.

Posted: April 10, 2019

Share on: Twitter Facebook LinkedIn
graphene

The U.S. Fire Administration reported over 1.3 million structure fires in 2017 causing an estimated 3,400 deaths, 14,670 injuries and $23 billion dollars in damages. The high cost of today's fire problem in lives and property is leading some researchers to look for innovative fire protection solutions.

One such solution is nanotechnology. It is used to make building and product materials stronger, lighter and at the same time, more fire resistant. What is nanotechnology?

Nanotechnology is the science, engineering and technology conducted at the nanoscale, (which is about 1 to 100 nanometers) that enables the manipulation of materials to fit existing needs.

How is nanotechnology used?

Nanotechnology is used in:

  • Starch-based coatings that are applied to textiles and furniture to increase fire resistance.
  • Brick, mortar and other clay products to lower thermal conductivity, and increase gas barrier properties.
  • Nanofiber mats. These mats, used in place of building insulation and some foams, attract thermal energy from flames and absorb it while self-extinguishing the fire. This limits fire spread and damage. Compartmentalization of fires is an important benefit of nanotechnology, allowing occupants more time to escape.
  • Hydrogels for fire resistant blankets and clothing to absorb heat and prevent thermal burns.
  • Polyetherimide nanocomposite foams to enhance thermal protection for appliances. These foams can be combined with nanoclays, which won't release toxic gases when exposed to flame.

How can nanotechnology be used in the future for fire safety?

There are many potential benefits that can be gained by leveraging nanotechnology for fire safety. They include:

  • Smoke alarms that can detect particles at the very start of a fire.
  • Fire resistant nanocoatings that increase material strength and durability to better withstand high thermal energy.
  • Fire suppression systems using various chemical mixtures broken down to particle size to better extinguish the fire.
  • Fire resistant nanocoatings on fuel lines and engine components to prevent vehicle fires.

Where is future research needed?

There are three areas that are delaying widespread use of nanotechnology.

1. Health concerns.

Cancer and silicosis are known to be a concern with nanotechnologies. We know that harmful exposure is possible through inhalation, skin contact or ingestion. But there's still a great deal that we don't know about the full scope of risks to the fire service and the public and precisely under what conditions.

2. Reliability of nanocoatings.

Nanoparticles tend to form bubbles when they start to char. When those bubbles burst, the nanoparticles are propelled outward and protection is reduced. Finding a cost-effective way to mitigate this problem needs to be found.

3. Cost.

Production on a wide scale is expensive and most corporations choose to invest in the cheaper option of suppression systems and detectors.

Further reading

The Implications of Nanotechnology for the Fire Service: Avoiding the Mistakes of the Past by Daniel John O'Sullivan

Source: Olawoyin, R. (2018). Nanotechnology: the future of fire safety. Safety Science: 110 (2018), pp 214-221. https://doi.org/10.1016/j.ssci.2018.08.016


Learn more about this research

Summary information for this article was provided by the NETC Library. You can request access to this research study by contacting the library at netclrc@fema.dhs.gov.


This summary is for informational purposes only. More +
As such, the content does not reflect any official positions, policies, or guidelines on behalf of the sender, the U.S. Fire Administration, FEMA, DHS, nor any other federal agencies, departments or contracting entities. Similarly, this summary does not represent in any manner an official endorsement or relationship to any private or public companies, organizations/associations, or any authors or individuals cited or websites associated within the article.

Explore more articles:

graphene

Using nanotechnology to minimize fire damage

Posted: April 10, 2019 NEW

Nanotechnology, manufactured at scale and low cost while posing minimal health risks, may potentially point to a future with fewer fires that are less lethal and less damaging.

sprained knee

Mitigating fireground injury risks: Suggested interventions

Posted: Aug. 30, 2018

Firefighting poses many hazards that come in a wide variety of work settings. A recent study focused on the scope and nature of fireground injuries to determine what steps fire departments can take to better mitigate hazards posed by certain risks.

firefighters removing SCBA

Firefighter burnout and workplace safety

Posted: July 26, 2018

Are firefighters who show symptoms of burnout less likely to follow safety procedures? A team of researchers recently set out to learn if burnout impacted a firefighter’s ability to follow required safe work practices.

firefighters walking away in PPE after a fire

Clean gear is the new badge of honor

Posted: April 5, 2018

This article looks at firefighter perceptions of dirty gear and how Palm Beach County Fire Rescue promoted organizational resilience to combat the risk of firefighter cancer from dirty gear.

firefighter undergoing vo2 max testing

Testing for metabolic syndrome in firefighters

Posted: Dec. 21, 2017

Results of a recent study to see whether resting heart rate and heart rate reserve could be reliable predictors of metabolic syndrome in firefighters when VO2 max testing is not available.

suburban neighborhood

Identifying community fire risk using geographic mapping

Posted: Dec. 14, 2017

Researchers using GIS software evaluated a local fire safety intervention program to see if the residents selected for the program were actually living in areas with the highest fire risk. Here’s what they found.

fire extinguisher

38 million Kidde fire extinguishers recalled

Posted: Nov. 6, 2017

Kidde has announced a recall of almost 38 million fire extinguishers. They may not work during a fire emergency if they become clogged and require a lot of force to use.

firefighters wearing PPE

PPE use and unsafe actions by firefighters

Posted: Sept. 28, 2017

What causes firefighters to take unsafe actions related to personal protective equipment (PPE) use — even though they know they should be doing the opposite? A team of researchers led by Drexel University’s Center for Firefighter Injury Research and Safety Trends recently set out to understand why this occurs and what the fire service can do to fix it.

EMS workers treating a patient at a protest

Violence against EMS responders

Posted: Aug. 31, 2017

Findings from a research project that investigated injuries to paramedics and emergency medical technicians from patient-initiated violence.